Product Description
PDC Solvent Cement - For Rigid PVC Pipes & Fittings
PVC and ABS cement for use in joining pipe, fittings, couplers etc.
Directions:
1. Do not decant, stir or dilute
2. Cut pipe squarely, remove swarf from inner and outer edges
3. Lightly abrade contact surfaces with emery cloth, then clean with a cleaning solvent using a clean cloth
4. With a clean brush, apply an even layer of cement in a lengthwise direction to both surfaces
5. Immediately push together to the full depth without twisting and hold firmly for 30 seconds
6 Quickly remove any excess cement
7. Leave joint undisturbed for 10 minutes and allow 24 hours at normal ambient temperature before putting into service
8. Reseal container immediately after use
