Aquarium Heaters

Catalog No: 138108

Submerged heater and thermostat designed to the highest standards. These heaters feature a high grade heater guard (normally costing £3.50 to buy separately) and an incorporated sensitive and reliable thermostat to ensure constant temperate. Adjusting temperature is made easy with a temperature knob conveniently located at the top of the heater. Safety is ensured with a protective shield and 2.3mm safety glass. Installation is simple with a 1.5 metre cable (2 metres with larger models), and a 2-year warranty is provided.

The 150w aquarium heater is suitable for tanks between 75 litres and 150 litres (15-30 gals approx)

Aquarium Heater Specifications

• 2.3mm Safety Glass.
• Two suction pads to secure to tank.
• Clearly visible temperature control knob on top of aquarium heater for easy precise setting between 16 to 32 C.
• 1.5m cable complete with 3 pin plug.
• Aquarim Heater Guard prevents fish burning themselves.
• 2 year warranty.
• Length: 30cm (12 inches) when used without aquarium heater guard.
• Length: 36cm (14.5 inches) when used with aquarium heater guard.

Connecting your heater:

Set the temperature indicator to the correct position by turning the adjusting knob on the top to the left or right. In the packaging, you will find two clip suckers and a protector. Slide this protector around the heater. Place the heater in the aquarium at the right water level and use the suckers to firmly secure it to the glass wall of the aquarium.

The correct water level is clearly displayed on the combi-heater, follow this strictly. Wait 5 minutes before you switch on the heater, so that the thermostat of the combi-heater has enough time to acclimatise to the surrounding water temperature.

Insert the plug into a good and safe socket; ensure that water or splashes of water cannot enter the socket!

Place the combi-heater so that the outlet of the filter or an air-stone circulates the water in the aquarium alongside the heater so that the water is heated evenly.